Find Existing BMW 323 Car Recalls

On these sport utility vehicles, the lower steering shaft coupling includes a plastic collar which fits over the lower steering rack input shaft. This collar is pushed down onto the steering rack and tightened during assembly. On some of the affected vehicles, the collar may not have been pushed down fully onto the rack at the assembly plant. If this occurs, operation of the vehicle, especially in rough road conditions, can cause the clearance between the collar and the steering rack to increase to the point where the input shaft can separate from the rack, resulting in a loss of steering capability.

Dealers will inspect the steering rack input shaft collar for proper positioning, and reposition if necessary. The manufacturer reported that owner notification would begin during February 2000. Owners who do not receive the free remedy within a reasonable time should contact BMW at 1-800-831-1117.

FIND YOUR LOCAL BMW Service Centre

The brake lamps in these vehicles are controlled by a switch activated by the movement of the brake pedal. This switch could fail internally, causing it to remain either in the "brake lamps off" position or in the "brake lamps on" position If this happens, the brake lamps either will not operate or will be continuously illuminated, regardless of brake pedal position.

Dealers will inspect and, if necessary, replace the existing brake lamp switch with an improved switch. The manufacturer has reported that owner notification was to begin during March 2000. Owners who do not receive the free remedy within a reasonable time should contact BMW at 1-800-831-1117.

FIND YOUR LOCAL BMW Service Centre

On certain passenger vehicles equipped with 18-inch tires (18-inch tires are standard equipment on the M5 and optional equipment on the 7-Series models), the machine used to mount and inflate the tires on the wheels at the assembly plant may have damaged the sidewall of one or more tires. The damaged area could weaken to the point where a sudden loss of air from the tire could occur. Handling and control would be drastically affected, increasing the risk of a crash.

Dealers will inspect the tires, and, if damage from the mounting machine is found, the tire will be replaced. The manufacturer has reported that owner notification was to begin during February 2001. Owners who do not receive the free remedy within a reasonable time should contact BMW at 1-800-831-1117.

FIND YOUR LOCAL BMW Service Centre

On certain sport utility vehicles, there is a plastic carrier to which the oil filter housing is attached. Oil supply and return lines are attached to the filter housing. Over time, this carrier could sag slightly. If this happens, one of the oil lines, which are armored with steel mesh, could come into contact and chafe a steel brake line located immediately underneath. Continued chaffing can cause the anticorrosion coating of this brake line to fail, allowing the brake line to rust through and leading to loss of brake fluid, failure of the rear brake circuit, extended stoppage distances, and possible crash.

Dealers will install a rubber spacer below the plastic carrier to prevent sagging and subsequent contact between the oil and brake lines. Brake lines whose anticorrosion layer is found to be damaged as a result of contact with the oil line will be replaced. The manufacturer has reported that owner notification was to begin during July 2001. Owners who do not receive the free remedy within a reasonable time should contact BMW at 1-800-831-1117.

FIND YOUR LOCAL BMW Service Centre

On certain sport utility vehicles, over an extended period of time, abrasion particles could deposit on the electrical contacts within the transmission gear position indicator switch, causing a disruption of the electric current through the contacts. If the disruption occurs when the vehicle is stationary with the transmission in the Neutral or Park positions, the transmission will switch automatically into the emergency program, which is displayed in the instrument cluster via a warning lamp and a message, "TRANS. FAIL-SAFE PROG." In this case, the vehicle can be driven in lower gears only with limited engine output. If this problem occurs, the ability to maintain speed in traffic and/or accelerate could be greatly diminished, possibly leading to a crash.

Dealers will replace the transmission gear position indicator switch. The manufacturer has reported that owner notification was to begin during July 2001. Owners who do not receive the free remedy within a reasonable time should contact BMW at 1-800-831-1117.

FIND YOUR LOCAL BMW Service Centre

BMW of North America, LLC (BMW) is recalling certain model year 2000 323i sedans, coupes, convertibles, and Sports Wagons; 2000 328i sedans and coupes; 2001-2005 325i sedans, coupes, convertibles, and Sport Wagons; 2001-2005 325xi sedans and Sports Wagons; 2006 325i coupes and convertibles; 2001-2006 330i sedans, coupes, and convertibles; 2001-2005 330xi sedans; and 2001-2006 M3 coupes and convertibles to address a safety defect in the passenger side frontal air bag which may produce excessive internal pressure that could cause the air bag inflator to rupture upon deployment of the air bag.

BMW will notify owners, and dealers will replace the passenger side frontal air bag, free of charge. An interim notice will be mailed to owners in August 2014. A second notice will be mailed when an adequate supply of parts is available, currently anticipated to be in October 2014. Owners may contact BMW customer service at 1-800-525-7417 or email BMW at CustomerRelations@bmwusa.com.

FIND YOUR LOCAL BMW Service Centre

BMW of North America, LLC (BMW) is recalling certain 2000-2002 BMW 320i, 323i, 325i, 325xi, 330i, 330xi, 323Ci, 325Ci, 330Ci, M3, 323iT, 325iT and 325xiT vehicles, 2001-2002 525i, 530i, 540i, M5, 525iT and 540iT vehicles, and 2001-2003 X5 3.0i, X5 4.4i, and X5 4.6is vehicles. These vehicles may have had a driver-side air bag module installed as replacement equipment such as after a vehicle crash necessitating replacement of the original air bag, or as a remedy part for a prior recall. These replacement modules contain an air bag inflator that may rupture due to propellant degradation occurring after long-term exposure to lower absolute humidity, temperature and temperature cycling.

BMW will notify owners, and dealers will inspect the driver side air bag module, replacing it as necessary, free of charge. The recall is expected to begin March 15, 2017. Owners may contact BMW customer service at 1-800-525-7417.

FIND YOUR LOCAL BMW Service Centre

BMW of North America, LLC (BMW) is recalling certain 2000-2002 325i and 325xi Sedan, and 323Ci, 325Ci, and 330Ci Convertible vehicles. This recall affects certain vehicles that may have had a driver-side air bag module installed as replacement equipment such as after a vehicle crash necessitating replacement of the original air bag, or as a remedy part for a prior recall. The frontal air bag inflator may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.

BMW will notify owners, and dealers will inspect and, as necessary, replace the driver's air bag module, free of charge. The recall is expected to begin November 25, 2019. Owners may contact BMW customer service at 1-800-525-7417. Note: This recall is an expansion of previous recalls, numbers 17V-047 and 19V-015.

FIND YOUR LOCAL BMW Service Centre

BMW of North America, LLC (BMW) is recalling certain 1999-2000 323i and 328i and 2000 323Ci and 328Ci vehicles equipped with Non-Azide Driver air bag Inflators (NADI) manufactured by Takata. These inflators do not contain phase stabilized ammonium nitrate (PSAN) propellant. Due to a manufacturing issue, the NADI inflators may absorb moisture, causing the inflators to rupture or the air bag cushion to underinflate.

BMW will mail interim notices informing owners of the safety risk on January 17, 2020. Owners will receive a second notice when the remedy becomes available. Dealers will inspect the driver air bag inflators and replace them, as necessary, free of charge. Owners may contact BMW customer service at 1-800-525-7417.

FIND YOUR LOCAL BMW Service Centre

BMW of North America, LLC (BMW) is recalling certain 1999-2001 323i, 325i, 328i and 330i and 2000-2001 323Ci, 325Ci, 328Ci, 330Ci, 323iT, and 325iT vehicles equipped with Non-Azide Driver air bag Inflators (NADI) manufactured by Takata. These vehicles may have received a replacement driver air bag as part of a vehicle repair. Due to a manufacturing issue, the replacement NADI inflator may absorb moisture, causing the inflator to rupture or the air bag cushion to underinflate.

BMW will mail interim notices informing owners of the safety risk on January 17, 2020. Owners will receive a second notice when the remedy becomes available. Dealers will inspect the driver air bag inflators and replace them, as necessary, free of charge. Owners may contact BMW customer service at 1-800-525-7417.

FIND YOUR LOCAL BMW Service Centre

BMW of North America, LLC (BMW) is recalling certain 2000-2005 323iT, 325iT, 325xiT, 320i, 323i, 325i, 325xi, 328i, 330i and 330xi and 2000-2006 323Ci, 325Ci, 328Ci, 330Ci, M3 Coupe, 323Cic, 325Cic, 330Cic, and M3 Convertible vehicles equipped with non-desiccated frontal Takata PSAN inflators and PSPI passenger frontal air bag inflators containing phase stabilized ammonium nitrate (PSAN) propellant that were used as interim remedy parts for previous Takata recalls. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.

BMW will notify owners, and dealers will replace the passenger's front air bag, free of charge. The recall is expected to begin March 6, 2020. Owners may contact BMW customer service at 1-800-525-7417.

FIND YOUR LOCAL BMW Service Centre

On certain passenger vehicles, it is possible that the retaining clip that secures the brake booster pushrod to the brake pedal arm was not properly installed during production. The clip could detach from the pin on the brake pedal arm, allowing the pushrod to disconnect from the arm. If this occurs, braking would not be possible, increasing the risk of a crash.

Dealers will inspect the clip for tight installation and replace the clip if it is loose. Owner notification began in May 1999. Owners who do not receive the free remedy within a reasonable time should contact BMW at 1-800-831-1117.

FIND YOUR LOCAL BMW Service Centre

On certain passenger vehicles, it is possible that the retaining clip that secures the brake booster pushrod to the brake pedal arm was not properly installed during production. The clip could detach from the pin on the brake pedal arm, allowing the pushrod to disconnect from the arm. If this occurs, braking would not be possible, increasing the risk of a crash.

Dealers will inspect the clip for tight installation and replace the clip if it is loose. Owner notification began in May 1999. Owners who do not receive the free remedy within a reasonable time should contact BMW at 1-800-831-1117.

FIND YOUR LOCAL BMW Service Centre